Education Qualification

B.E/B.Tech or M.Tech in C.Sc/ ECE/ EEE

Years of experience

1 to 3 years

Key skills/JD

• Experience in Software Design and Development activities (creating software requirements, design, coding, etc.)
• Experience in Verification and Validation (V & V) activities (Low Level Testing (Unit Testing) or Hardware Software Integration Testing (HSIT)
• Strong programming and analyzing skills in C or C++ programming language
• Experience in Ada programming language (Ada Compiler)
• For V & V, experience in testing using testing tool (LDRA Tool Suite or RTRT), requirement based testing, structural coverage analysis and debugging
• Working knowledge of DO-178B or DOD STD 2167A Standards and processes in Real Time, Safety Critical / Mission Critical Application in Aerospace or Nuclear or Railways Domain
• Good written and oral communication skills

No. of positions

7

Education Qualification

B.E/B.Tech, M.Tech in C.Sc/ ECE/ EEE

Years of experience

3 or 6 years

Key skills/JD

• Good Embedded C and C++ programming skills
• Hands-on experience on Embedded Development.
• Creative problems-solving and diagnostic/troubleshooting abilities

No. of positions

7

Education Qualification

B.E/B.Tech, M.Tech in C.Sc/ ECE/ EEE

Years of experience

1 to 3 years

Key skills/JD

• Good Embedded C and C++ programming skills
• Hands-on experience on Embedded Development.
• Creative problems-solving and diagnostic/troubleshooting abilities

No. of positions

2

Education Qualification

B.E/B.Tech, M.Tech in C.Sc/ ECE/EEE

Years of experience

1 to 3 years

Key skills/JD

• Good Embedded C and C++ programming skills
• Hands-on experience on Linux platform (Kernel and User programming)
• Hands-on experience on Kernel Debugging, GDB, JTAG, SWD, and similar tools, Experience with standard debuggers and tool chains
• Experience in Board bring up
• Creative problems-solving and diagnostic/troubleshooting abilities

No. of positions

3

Education Qualification

B.E /B.Tech in CS/IS

Years of experience

2 to 6 years

Key skills/JD

• Strong C++ and Qt development skills
• Experience in 2D and 3D GIS
• Experience in GPU programming
• Experience in Database management
• Experience in TCP/IP and UDP
• Experience in Human Machine Interface.
• Experienced with source/version control software, including Git
• Experience with developing, enhancing and integrating cross-platform SDKs is a plus.
• Hands-on code contribution and delivery - libraries, API's, documentation.
• Experience in real-time communications software development and related build environments
• Experience designing, developing and debugging networked client/server applications.

Education Qualification

B.E/B.Tech/M.Tech in C.Sc, ECE, EEE

Years of experience

3 to 5 years

Key skills/JD

• Experience in Verification & Validation (V&V) as per DO-178B/C Level A/B guidelines
• Good experience in HSIT / SIT
• Should have good working experience in C, C++
• Experience in scripting languages like Python, VB Scripting
• Candidates with Exposure to tools like VectorCAST, DOORs, SVN preferred
• Self-starter with positive attitude and high professional ethics and working successfully under time-constrained environment.
• Should be ready to working from office

No. of positions

6

Education Qualification

B.E, B.Tech- EEE/ECE

Years of experience

8 to 12 years

Key skills/JD

• Expertise in Verilog Coding and RTL Abstraction (8+ years of coding experience is a must)
• Expertise in Xilinx, Vivado / Questa Sim Environment
• Expertise in working with High-Speed Data, I/O and Integrated CPU
• Proficient in Digital Design Concepts, Design Tools, Simulation, Timing and Modelling
• Expertise in handling of Fast Data to Slow and vice-versa
• Expertise in handling Data to and from DDR
• Know-how of SerDes (Serial / De-serializer)
• Know-how of AMBA, AHB, AXI Protocols
• Must have working experience with I2C, EEPROM, SPI, EMMC devices
• Hands on to create, burn and debug FPGA Binaries
• Should have the capability to work in a dynamic work atmosphere where he/she needs to be cooperative with the other associates of the team seated either locally or globally
• Should be able to execute the chip enhancement procedures including the procedures related to synthesis and time investigation.

No. of positions

1

Education Qualification

B.E, B.Tech- EEE/ECE/CS

Years of experience

12 to 15

Key skills/JD

• Expertise in Verilog Coding and RTL Abstraction (8+ years of coding experience is a must)
• Expertise in Xilinx, Vivado / Questa Sim Environment
• Expertise in working with High-Speed Data, I/O and Integrated CPU
• Proficient in Digital Design Concepts, Design Tools, Simulation, Timing and Modelling
• Expertise in handling of Fast Data to Slow and vice-versa
• Expertise in handling Data to and from DDR
• Know-how of SerDes (Serial / De-serializer)
• Know-how of AMBA, AHB, AXI Protocols
• Must have working experience with I2C, EEPROM, SPI, EMMC devices
• Hands on to create, burn and debug FPGA Binaries
• Should have the capability to work in a dynamic work atmosphere where he/she needs to be cooperative with the other associates of the team seated either locally or globally
• Should be able to execute the chip enhancement procedures including the procedures related to synthesis and time investigation.

No. of positions

1

Education Qualification

B.E / B.Tech ECE/ CS

Years of experience

Freshers(2020 batch) with aggregate 70%

Commitment

• 1year commitment with Rs.50,000/- Bank Guarantee

Education Qualification

B.E / B.Tech in ECE/CS

Years of experience

3 to 5 years

Key skills/JD

• The candidate should have experience in DO-178C Level A/B avionics application SW development (using OOAD and C++, or Java) – e.g Cockpit Displays, Flight Management Systems, etc
• Should have practical knowledge on application of OOAD/OOPS principles in software design. Should be familiar with the application and implementation of common design patterns (like Singleton, Façade, Factory, etc). and Liskov Substitution principle.
• Should have strong C++ debugging skills
• Should possess good Low-Level requirement writing skills (from high level requirements or source code)
• Perform code reviews based on DO-178C checklists

Education Qualification

M.Tech/MSc/Doctorate (Electronics & Communication or equivalent) with specialization in Digital Communication or GNSS

Years of experience

6 to 8 years of experience in the area of GNSS Receiver Design and Development.

Key skills/JD

• Good background in GNSS-related concepts;
• Good programming skills and experience with Matlab, Simulink and embedded software;
• Practical experience in aeronautical/aerospace GNSS solutions (desired for the post);
• Background on advanced GNSS concepts, such as precise orbit determination, PPP, RTK algorithms (desired for the post);
• The ideal candidate is a committed team player, and should be at ease with timely execution of multiple tasks assigned;
• Open minded to different cultures in working, he always uses a collaborative approach, helping to find shared solutions.
• Working knowledge of GNSS acquisition, tracking and Navigation algorithms, signal processing, integration of sensors to GNSS, Interference detection and mitigation. Understanding of the GNSS receiver regulatory requirements like DO-229, ED-259 etc. Understanding of the application of GNSS receiver in avionics, automotive and other applications. Working experience in GNSS software and hardware development and should be able to handle the software integration and testing of GNSS. Knowledge of hardware design, DO-178B/C, DO-254 is desirable and added advantage
• Familiarity with carrier phase measurement integration, on-board sensor concepts and modelling, including inertial sensors, PPP& RTK algorithms

Education Qualification

Diploma or BE – E & C/ EEE

Years of experience

3 to 5 years

Key skills/JD

• Altium tool knowledge is a must Other tools Allegro, Mentor graphics and PADS desirable.
• Knowledge of mixed signal, highspeed digital and RF board design.
• Knowledge of design with SMD and BGA components
• Knowledge of PCB stack up design and Multilayer Board design
• Knowledge of Flexi PCB design
• Familiarity with IPC 2222, IPC7351 guidelines
• Familiarity with DFT and DFM guidelines
• Familiarity with EMI/EMC guidelines and Analysis
• Knowledge of PCB fabrication and PCB Assembly processes
• Knowledge of PADS, Mentor Graphics-Expedition, is desirable
• High speed Board design for Avionics and Automotive applications. Should be able to technically interact with Internal engineering team. Should able to provide qualitative feedback to engineering team from board design point of view.

No. of positions

2

Education Qualification

B.E E&C or M.Tech in RF area

Years of experience

0 to 3 years

Key skills/JD

• Capable of design and testing RF projects with minimal guidance
• Capable to interact with customers and understand the project requirements.
• Capable of designing RF Sub systems and systems like Power amplifier, Filter, Up/Down converters and LNAs
• Hands on experience on modulation techniques like AM/FM/BPSK/QPSK is desirable.
• Good knowledge on RF measurement techniques such as IP3, Harmonics, Phase noise, jitter, noise figure.
• Capable of adopting new design techniques and implement with a minimum guidance.

Education Qualification

B.E E&C or M.Tech in RF area

Years of experience

3 to 6 years

Key skills/JD

• Capable of design and testing RF projects with minimal guidance
• Capable to interact with customers and understand the project requirements.
• Capable of designing RF Sub systems and systems like Power amplifier, Filter, Up/Down converters and LNAs
• Hands on experience on modulation techniques like AM/FM/BPSK/QPSK is desirable.
• Good knowledge on RF measurement techniques such as IP3, Harmonics, Phase noise, jitter, noise figure.
• Capable of adopting new design techniques and implement with a minimum guidance.
• Good knowledge in Schematic entry & RF Layout recommendations.
• Hands on experience on RF software tools like ADS, Microwave office and others.
• Experience in handling test equipment like Signal Generator, Spectrum Analyzer, Network Analyzer & Oscilloscope
• Capable to provide technical guidance to the teammates.

Education Qualification

B.E or M.Tech

Years of experience

3 to 5 years

Key skills/JD

• Good knowledge about C programming.
• Must have Worked on COM stack of AUTOSAR.
• Communication protocols worked on – CAN, LIN and FlexRay.
• Good knowledge on DEM, DCM of AUTOSAR.

No. of positions

2

Education Qualification

B.E or M.Tech

Years of experience

3 to 5 years

Key skills/JD

• Good knowledge about C programming.
• Hands on experience in Unified Diagnostic Services(UDS) Protocol.
• Hands on Experience in Autosar.
• Communication protocols worked on – CAN, LIN and FlexRay

No. of positions

2

Education Qualification

BE/BTech – EC/ EE /Telecommunication

Years of experience

3 to 8 years

Work Location

UK

Working conditions and travel flexibility

• Must be flexible, as job may require working outside the normal working hours or shift work
• Ability to take on any task required to satisfy customer requirements
• Flexible to travel and stay for longer duration across various locations in UK

Key skills/Job Responsibilities

• Responsible for Testing and Fault finding Production / Service units to component level using Test Specifications and circuit diagrams
• To be able to follow departmental, quality and Health & Safety procedures
• Design and testing of automated test equipment's used in avionic products
• To be able to assist in the qualification of test equipment's
• Fault-finding down to component level using Logic analyser, Emulator and Digital storage scope
• Repair and assemble products and be able to carry out soldering to IPC 600 J standard 001
• Produce investigation reports and Statement of work
• Provide assistance to Engineering with investigation units
• Provide Technical assistance to Internal and External customers
• To ensure Repair products and Turnaround time is achieved within 5 days
• Responsible for providing regular updates to meet the needs of each customer regarding the status of the units
• Demonstrate a level of innovation within the cell to assist continuous improvements
• Perform Inspection on all activities as and when required

System Engineer Qualifications / Skills:

• Excellent oral and written communication skills
• Decision-making
• Analytical skills
• Knowledge of systems engineering software tools
• Leadership Qualities
• To work as a proactive team member of a nominated department
• To be able to communicate effectively with the customers and provide Technical support with Engineering on Development products
• Should be responsible for providing regular updates to meet the needs of each customer regarding the status of the projects

Recruitment process

• Online technical written test
• Technical Interview in MS teams for the shortlisted candidates
• HR interview for the shortlisted candidates from the technical interview.
• Selection

Skills

Should be Good in Academic fundamentals/basics

Qualification & Branches

BE/B.Tech – CS/IS/IT

BE/B.Tech – ECE/EEE/ETE/EIE(should be interested to work in software domain)

% Cut-off

BE/B.Tech - 70% or 7.5 CGPA and above in BE (No backlogs)

Annual CTC

3.6 LPA

Joining Location

Accord Global Technology Solutions Private Limited. No.72 & 73, 1st & 4th floor, K.R. Colony, Domlur Layout, Bangalore-560071.

Commitment/Any Bond for BE graduates

3 years commitment one lakh Bank Guarantee.

(Bank Guarantee (BG): Selected students need to submit one lakh bank guarantee in Accord specified format by approaching any Nationalized Bank any Branch by depositing one lakh in their respective accounts. The BG should be produced at the time of joining.

Please note: After 3 years candidates will be able to take back the money with interest/Bonus subject to the Bank policy)

Employment type

Regular

Education Qualification

BE/BTech – EC/ EE /Telecommunication

Years of experience

5 to 12 years

Work Location

UK

Working conditions and travel flexibility

• Must be flexible, as job may require working outside the normal working hours or shift work
• Ability to take on any task required to satisfy customer requirements
• Flexible to travel and stay for longer duration across various locations in UK

Key skills/Job Responsibilities

• Must have strong experience in complete Hardware development life cycle as per DO254 (Technical feasibility, requirements, preliminary and detailed design, prototype manufacturing, test and evaluation, qualification and certification)
• Should have experience in the IVVQ (Integration, Verification, Validation and Qualification) including requirements management
• To be able to follow departmental, quality and Health & Safety procedures
• Design and testing of automated test equipment's used in avionic products
• To be able to assist in the qualification of test equipment's
• Must have good experience in bench test set-up, functional testing and performance evaluation
• Produce investigation reports and Statement of work
• Provide assistance to Engineering with investigation units
• Provide Technical assistance to Internal and External customer
• Must have experience in developing Qualification Test procedures (QTPs), Qualification Test Reports (QTR), Qualification by similarity reports (QBSR) and other documents required by certification authorities
• Responsible for providing regular updates to meet the needs of each customer regarding the status of the units
• Demonstrate a level of innovation within the cell to assist continuous improvements
• Must have experience in interfacing with external test facilities for environmental and EMI/EMC and other electrical tests as per MIL-STD and DO-160 standards
• Perform Inspection on all activities as and when required

System Engineer Qualifications / Skills:

• Excellent oral and written communication skills
• Decision-making
• Analytical skills
• Knowledge of systems engineering software tools
• Leadership Qualities
• To work as a proactive team member of a nominated department
• To be able to communicate effectively with the customers and provide Technical support with Engineering on Development products
• Should be responsible for providing regular updates to meet the needs of each customer regarding the status of the projects

Education Qualification

BE/BTech – CS/ IS /IT

Years of experience

10 to 18 years

Work Location

UK

Working conditions and travel flexibility

• Must be flexible, as job may require working outside the normal working hours or shift work
• Ability to take on any task required to satisfy customer requirements
• Flexible to travel and stay for longer duration across various locations in UK

Key skills/Job Responsibilities

• Development and Testing activities for Avionics software as per DO-178C
• To competently attempt to resolve technical problems associated with assigned products
• Responsible for Prototype Development and Testing of Avionics software
• Responsible for Development of Architecture, Design and Source code of Avionics software.
• Responsible for different phases of Avionics software testing - Hardware Software Integration Testing, Software Integration testing and Low-level testing.
• Responsible for customer interaction, project status/timeline and to meet end needs of the customer.
• Responsible for development of Embedded Software.
• To be able to assist in Certification Activities of Avionics software.
• To be able to assist in the development of Automated Test Environment for Avionics software testing.
• To be able to assist in software configuration management.
• Familiarity with design and analysis and test techniques for safety critical real time software
• Familiarity with DO-178C
• To help ensure engineering activity is carried out in accordance with engineering products
• Continuously seek to improve the process and procedures within your area
• To be able to follow departmental, quality and Health & Safety procedures
• Familiar with appropriate standards and process within area
• Some experience with parts of the software lifecycle
• Experience with formal requirements capture, validation and verification
• Design and testing of automated test equipment's used in avionic products
• To be able to assist in the qualification of test equipment's
• Produce investigation reports and Statement of work
• To ensure Repair products and Turnaround time is achieved within 5 days
• Perform Inspection on all activities as and when required
• There may be additional activities to perform from time to time in order to maximise the contribution to customers goals and objectives sites around the world

Software Engineer Qualifications / Skills:

• Excellent oral and written communication skills
• Decision-making
• Analytical skills
• Leadership Qualities
• To work as a proactive team member of a nominated department
• To be able to communicate effectively with the customers and provide Technical support with Engineering on Development products
• Should be responsible for providing regular updates to meet the needs of each customer regarding the status of the projects